ALS-IOT-PRJBD-STM32-01

  • Development Boards:
  • STM32 Nucleo-64
  • Outputs & Actuators:
  • RGB LED – (1Nos – On-Board)
  • User Push Button– (2Nos – On-Board)
  • LDR
  • Buzzer – (1Nos – On-Board)
  • Barometric Pressure Sensor BMP180
  • Temperature and Humidity Sensor Module DHT11/22
  • Wifi Module
  • Extra GPIO & Power Pins to Interface External Sensors

List of Experiments

  • Interfacing LED(RGB) with STM32 Cube IDE.
  • Interfacing LED/Buzzer with STM32
  • Interfacing DHT11sensor with STM32.
  • Interfacing BMP 180 sensor with STM32.
  • Develop a program to illustrate the working of LED with a push button.
  • Develop a program to simulate the interfacing of LDR with STM32 and control the intensity of LED using LDR.
  • Develop a program to simulate the working of LCD and print the room temperature value on LCD.
  • Develop a program to interface temperature sensor to read the room temperature, humidity and heat index and print the readings on the serial monitor.

ALS-IoT-PRJ-AUR-02

  • Board is driven using Arduino Uno controller
  • Facilitates MQTT or HTTP application protocol connection to various IOT cloud platforms such as thingspeak , AWS IoT, Microsoft Azure And IBM Blue mix.
  • Voltage regulator for generating 3.3V from +5V input through adaptor.
  • LED is provided for power on indication.
  • On board sensors :
    • DHT 22 Temperature & Humidity
    • Gas sensor
    • LDR sensor
  • Provision for Interface circuit for SSD1306 I2C OLED (128×64 pixels).
  • Provision for 16×2 alphanumeric display (LCD) with back lighting external -Optional
  • Interface circuit for Buzzer.
  • Servo motor interface
  • Two nos. of general purpose LEDs.
  • Two nos. of general purpose push button switches.
  • One SPDT 5V coil relays to drive external devices.
  • All Programmable I/o lines connected to berg pins.
  • Power supply adapter 5V DC,2A.
  • 5 pin 3.3V supply provided for external use.
  • 5 pin 5V supply provided for external use.
  • 5 pin  GND provided for external use.

ALS-IoT-PRJ-RPi-02

  • Board is driven using Raspberry Pi 4 Model B controller
  • Facilitates MQTT or HTTP application protocol connection to various IOT cloud platforms such as thingspeak , AWS IoT,  Microsoft Azure And IBM Blue mix.
  • Voltage regulator for generating 3.3V from +5V input
  • LED provided for power on indication.
  • On board sensors :
    • DHT 22 Temperature & Humidity
    • Gas sensor
    • LDR sensor
  • Onboard Interface circuit for SSD1306 I2C OLED (128×64 pixels).
  • Provision for 16×2 alphanumeric display (LCD) with back lighting external -Optional
  • Interface circuit for SPI ADC MCP3008 with 6 channels.
  •  Interface circuit for Buzzer.
  • servo motor interface
  •  Two nos of general purpose LEDs.
  • Two nos of general purpose push button switches.
  • One  SPDT 5V coil relays to drive external devices.
  • All Programmable I/o lines connected to berg pins.
  • Power supply adapter 5V DC,2A.
  • 5 pin 3.3V supply provided for external use.
  • 5 pin 5V supply provided for external use.
  • 5 pin  GND provided for external use.

ALS-IOT-PRJBRD-ESP32-01

  • Board is driven using ESP32 controller
  • Facilitates MQTT or HTTP application protocol connection to various IOT cloud platforms such as thingspeak , AWS IoT,  Microsoft Azure And IBM Blu
  • Can be connected to a Private Cloud
  • Voltage regulator for generating 3.3V from +5V input
  • LED  provided for power on indication.
  • On board sensors :
    • DHT 22 Temperature & Humidity
    • Gas sensor
    • LDR sensor
  • Interface circuit for SSD1306 I2C OLED (128×64 pixels)
  • 16×2 alphanumeric display (LCD) with back lighting –External -optional
  • Interface circuit for Buzzer
  • Provision for onboard SD card
  • Onboard servo motor interface
  • Two nos of general purpose LEDs.
  • Two nos of general purpose push button switches.
  • One  SPDT 5V coil relays to drive external devices upto AC 250V 10A.
  • All Programmable I/o lines connected to berg pins.
  • Power supply adapter 5V DC,2A.
  • 5pin 3.3V supply provided for external use.
  • 5 pin 5V supply provided for external use.
  • 5 pin GND provided for external use.