ARM Trainer Kit - 2148 BOARDS

ARM Trainer Kits : ARM7-06 | ARM7-11

ALS-SDA-ARM7-06

ARM7-06 Evaluation Board Specifications:-

LPC2148 16/32 BIT ARM7TDMI-S with 512K bytes Program Flash, 42K bytes RAM.
12MHz Crystal allows easy communication setup.
One on board voltage regulator for generating 3.3V. Input to this will be from External +5V DC Power supply through a 9-pin DSUB connector.
One RS232 interface circuits with 9 pin DSUB connector: this is used by the Boot loader program, to program LPC2148 Flash memory without external Programmer.
Piggy Back module containing LPC2148 controller.
Standard JTAG connector with ARM 2×10 pin layout for programming/debugging with ARM-JTAG.
Standard 26-pin FRC connectors to connect to on-board interface or some of ALS standard External Interfaces.
Reset push-button for resetting the controller.
SPI Interface: 2 channel ADC IC with POT and Temperature sensor.
I2C Interface: NVROM IC.
On chip ADC interface circuit.
Two External interrupt circuits with LED indication.

LCD 16×2 display alphanumeric display.
On-board eight push-button switches.
4×4 Key-Matrix connected to the port lines of the controller.
Eight general purpose LED’s.
Four-digit multiplexed 7-segment display interface.
8-bit DAC interface.
Stepper motor interface with direction and speed control.
DC motor interface with direction and speed control.
Interface circuit for on board Buzzer and Relay.
A number of software examples in ‘C-language’ to illustrate the functioning of the interfaces. The software examples are compiled using an evaluation version of KEIL4 ‘C’ compiler for ARM.
Compact elegant plastic enclosure.
Serial RS232 cable is included.
Operates off 5V DC.

ALS-SDA-ARM7-11

LPC ARM 2148 EVALUATION Board Specifications:-

CPU: 8085 Operating @ 3.072 MHz.
MEMORY: 64KB MAX (32KB EPROM and 32KB RAM) Battery Backup option for RAM (NOTE-The system is supplied with 16KB EPROM and 8KB RAM).
I/O PARALLEL: 48 I/O lines using two 8255.
I/O SERIAL: One RS232 compatible interface.
TIMER: Three 16 bit counter / timer using 8253.
KEYBOARD: External PC-AT compatible keyboard.
DISPLAY: 16 characters and 2 line LCD display.

BUS SIGNALS: All Address, Data and Control signals are terminated in 50 pin berg stick for user expansion.
PIC: Optional facility for 8259. All the 8 interrupts are terminated in berg stick.
MONITOR: 16KB of system monitor, which allows the user to enter, verify, debug or executive the program from on-board keyboard and display or through serial mode. On-line assemble using PC keyboard and LCD display.

Microprocessor Trainer Kit Feature

ALS SDA 86MEL 8086

A paragraph describing additional information about your business or services. This is a great opportunity to provide details about services that are not listed in the main services menu.

8086MEL Microprocessor Kit Specifications:-

CPU: 8086/88 Operating @ 5MHz in MAX mode with provision for 8087 Co-processor.
MEMORY: Maximum of 128KB on board EPROM. Maximum of 64KB on board RAM.
Battery: Backup option for RAM.
I/O PARALLEL: 48 I/O lines using two 8255.
I/O SERIAL: One RS232 compatible interface.
TIMER: Three 16 bit counter/timer using 8253.
KEYBOARD: External PC-AT Keyboard.
DISPLAY: Alphanumeric LCD module (2 line x 16 characters ).
BUS SIGNALS: All Address, Data and Control signals are terminated in 50 pin berg stick for user expansion.

PIC: Programmable Interrupt controller using 8259.
MONITOR: 64KB of powerful user friendly monitor.
SOFTWARE: Software with keyboard and serial modes. The PC KEYBOARD allows users to directly ASSEMBLE / DISASSEMBLE Mnemonics for 8086 using the alphanumeric LCD display.

Download Technical Brochure

educational trainer Kit

A short description of this service and how it helps clients.

IOT Boards

A short description of this service and how it helps clients.

Service 3

A short description of this service and how it helps clients.

Service 4

A short description of this service and how it helps clients.

Service 5

A short description of this service and how it helps clients.

Service 6

A short description of this service and how it helps clients.

Service 7

A short description of this service and how it helps clients.

Service 8

A short description of this service and how it helps clients.