Microcontroller Trainer Kits

Microcontroller Kits : 8051 ME | 8051MEL STANDALONE 8031/51 TRAINER

ALS-SDA-8051-ME

8051ME Micro Controller Kit Specifications:-
  • CPU: 8031 / 8051 operating at 11.0592 Mhz.
  • MEMORY:
    • EPROM1 32K bytes with monitor software.
    • EPROM2  Optional – 32K ROM.
    • RAM1  32 K Data RAM.
    • RAM2 32 K program/Data RAM.
  • I/O PARALLEL:  48 I/O lines using two 8255.
  • I/O SERIAL: One RS232 compatible interface.
  • TIMER: Three 16 bit counter /timer using 8253.
  • KEYBOARD: Consisting of 28 numbers of computer grade keys.
  • DISPLAY:  Six numbers of seven segment displays.

  • BUS SIGNALS: All bus signals are terminated in burg strip. Controller specific lines like port 1 lines  TO T1, INTO, INT1, etc. are terminated in a burg stick header.

  • MONITOR:  2KB of powerful user friendly monitor software.

  • SOFTWARE:  With keyboard and serial modes.

ALS-SDA-8031/51MEL

Board Specifications:-
  • CPU: 8031 / 8051 operating at 11.0592 MHz.
  • MEMORY:
    • EPROM1 32K bytes with Monitor Software.
    • EPROM2 Optional – 32K ROM.
    • RAM1  32 K Data RAM.

    • RAM2  32 K Program/Data RAM.

  • I/O PARALLEL:  48 I/O lines using two 8255.
  • I/O SERIAL: One RS232 compatible interface.
  • TIMER: Three 16 bit counter /timer using 8253.
  • KEYBOARD: External PC-AT Keyboard.
  • DISPLAY: Alphanumeric LCD module (2 Lines x 16 characters). 

  • BUS SIGNALS: All bus signals are terminated in FRC connectors. On chip port lines P1.0 to p1.7 TO, T1, INT1, INTO are also terminated.

  • MONITOR SOFTWARE: 32KB of powerful user friendly monitor. The ASCII keyboard allows users to directly assemble / disassemble mnemonics /    instructions for 8051 / 31 using the alphanumeric LCD display.

ALS-EMB-EVAL-04

EMBEDDED Evaluation Board Specifications:-
  • On-chip-64 KB Flash Program Memory.
  • 1792 bytes Expanded RAM (XRAM).
  • 2048 bytes EEROM.
  • SPI Interface.
  • 16-bit Programmable Counter Array for Compare, Capture, PWM.
  • Three programmable Timer/Counters
  • Two External Interrupts.
  • The Atmel AT89C51ED2- 8-bit micro controller with operating frequency of 11.0592MHz with an external crystal and supply voltage of +5V.
  • Four 10 pin FRC connectors connected to Port-0, to Port-3 of the controller.
  • One 26 pin FRC to connect  to  ALS standard NIFC interfaces.
  • A 9-pin D-type female connector used for RS232 serial I/O interface for UART experiments and also for flash programming. Serial interface through USB is also provided onboard.
  • A Push button switch for Reset and a Slide switch to select either program mode or run mode.
  • A Push button switch for External Interrupt  /INT0 or /INT1.
  • Alphanumeric 16×2 LCD display.
  • Two numbers of LED provided for general purpose .
  • 16 switches organized as 4 rows X 4 columns.
  • 8-bit DAC interface.
  • RTC interface.
  • One ADC (ADC0809) with a Potentiometer to vary analog input & Temperature Sensor IC LM335.
  • Four level Elevator simulator interface.
  • Traffic Light simulator interface.
  • On-board stepper motor and DC motor control interface. Stepper motor and DC motor is supplied with evaluation board.
  • Four-digit multiplexed 7-segment display interface.
  • Test Points for monitoring.
  • A number of software examples in ‘C-language’ to illustrate the functioning of the interfaces. The software examples are compiled using an evaluation version of KEIL ‘C’ compiler for 8051 and a monitor program allows debugging of the user programs in Controller Flash memory.
ALS89C51ED2 Microcontroller Trainer Kit Feature

89C51ED2 EVALUATION BOARD

A paragraph describing additional information about your business or services. This is a great opportunity to provide details about services that are not listed in the main services menu.
8086MEL Microprocessor Kit Specifications:-

  • CPU: 8086/88 Operating @ 5MHz in MAX mode with provision for 8087 Co-processor.

  • MEMORY:

    • Maximum of 128KB on board EPROM.

    • Maximum of 64KB on board RAM.

  • Battery: Backup option for RAM.

  • I/O PARALLEL: 48 I/O lines using two 8255.

  • I/O SERIAL: One RS232 compatible interface.

  • TIMER: Three 16 bit counter/timer using 8253.

  • KEYBOARD: External PC-AT Keyboard.

  • DISPLAY: Alphanumeric LCD module (2 line x 16 characters ).

  • BUS SIGNALS:  All Address, Data and Control signals are terminated in 50 pin berg stick for user expansion.

  • PIC: Programmable Interrupt controller using 8259.

  • MONITOR: 64KB of powerful user friendly monitor.

  • SOFTWARE: Software with keyboard and serial modes. The PC KEYBOARD allows users to directly  ASSEMBLE / DISASSEMBLE  Mnemonics for 8086 using the alphanumeric LCD display.

Download Technical Brochure
ClicK To Download brochure

educational trainer Kit

A short description of this service and how it helps clients.

IOT Boards

A short description of this service and how it helps clients.

Service 3

A short description of this service and how it helps clients.

Service 4

A short description of this service and how it helps clients.

Service 5

A short description of this service and how it helps clients.

Service 6

A short description of this service and how it helps clients.

Service 7

A short description of this service and how it helps clients.

Service 8

A short description of this service and how it helps clients.